







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Winchester Homeowners Choose KraftMaid Construction
We provide independent KraftMaid construction service in Winchester, NV, covering cabinet installation and refacing, kitchen remodeling, and bathroom vanity work. What sets our KraftMaid work apart is focus: we know how these cabinets are built, how their doors and drawers fail in desert conditions, and which repairs actually hold. We’re not affiliated with or authorized by KraftMaid. We’re an independent contractor that works on their products every week.
Winchester is its own kind of place. This unincorporated Clark County pocket sits wedged between Las Vegas and the Strip, so everything here runs on Clark County Building Department permits and Nevada State Contractors Board licensing rather than a city hall of its own. Much of our KraftMaid work happens in the low-rise apartment courts and small stucco tract homes off the Paradise Road and Maryland Parkway corridor, where kitchens from the 1960s through the 1980s are being reworked one unit at a time. Call (888) 345-2603 for a free estimate.
Why Trust Construction Winchester for Your KraftMaid Construction?

Our technicians have up to 14 years of experience, and a good share of that has been spent inside KraftMaid boxes: hanging Vantage doors, leveling Waypoint drawer fronts, refacing Homestead frames that are still solid after decades of daily use. That matters because KraftMaid cabinets are built around a system. The hinges, the drawer slides, the door thickness, and the box tolerances all work together. A generic hinge that looks close enough usually isn’t, and a slide that doesn’t match the original drilling pattern will pull out of particleboard within a season.
So we fit quality parts that match the cabinet, not whatever happens to be on a shelf. We work carefully around finished surfaces, we seal cut edges and penetrations because a kitchen in Winchester sees hard temperature swings between a 105°F summer afternoon and a cooled interior, and we keep the work warranty-safe. If a repair would compromise the cabinet’s structure or finish, we say so before anyone starts swinging a hammer. You’ll get a written line-item quote up front, and the price doesn’t move once work begins.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common KraftMaid Construction Problems We Fix in Winchester
KraftMaid makes a wide range of cabinetry, and the failures we see tend to follow the material and the climate rather than any one product line. Here are the five calls we field most often in Winchester.
- Thermofoil and laminate door delamination. The plastic film on these doors lifts at the edges and corners, usually starting where moisture gets behind it or where heat softens the adhesive. In a Winchester kitchen, the usual culprit is a door near the range or dishwasher, or a bathroom vanity in a room with poor exhaust. Once the film lifts, it keeps peeling, so sealing the edge correctly is the whole job.
- Drawer box joint separation and sagging. Particleboard drawer boxes are strong in compression but weak against a loose fastener, and heavy pots and pans pull screw joints open over time. A drawer that sags and rubs is usually a joint problem, not a slide problem, and the fix has to address the box before a new slide will track straight.
- Soft-close hinge failure and misalignment. The dampers in soft-close hinges wear out, and doors start slamming or hanging crooked instead of closing flush. Because KraftMaid hinges are drilled to a specific pattern, a replacement has to match that pattern or the door sits proud of the frame.
- Finish cracking and yellowing near heat sources. Painted and stained finishes near ovens and cooktops take radiant heat every time the appliance runs. Over years that cooks the finish, causing hairline cracks and a dull yellow cast. It’s a repairable finish problem, but the fix only lasts if the heat exposure is reduced.
- Edge banding failure on exposed cabinet sides. The edge strip on a cabinet’s finished end is a thin glue bond, and dry desert air shrinks and lifts it. Exposed ends on an island or a run that ends at a doorway are where you’ll spot it first.
One version of this plays out often: a homeowner notices the KraftMaid Vantage cabinet doors in their kitchen peeling at the edges, a common issue with thermofoil finishes. A qualified pro typically identifies the affected doors, checks for any underlying moisture problems, and replaces the delaminated doors with new ones or applies a fresh veneer, ensuring proper sealing to prevent recurrence.
KraftMaid Parts & Our Repair-vs-Replace Approach

We source OEM KraftMaid parts for critical components like hinges and drawer slides when they’re available, and high-quality aftermarket alternatives when OEM is discontinued or backordered. What we won’t do is claim we stock or carry genuine KraftMaid parts on a shelf, because we don’t. We source what fits your cabinet and get it to your job.
The repair-or-replace call is the part worth talking through. Cosmetic issues, including peeling doors, worn hinges, sticking drawers and finish flaws, almost always justify repair. The box is still good and the replacement cost is far lower. Structural compromise is different. Water-swollen particleboard, cracked cabinet sides, frames that have pulled away from the wall, or a box that’s lost its square generally point toward replacement rather than patching, because a new door hanging on a failing frame just fails again.
Call (888) 345-2603 to talk through your cabinet and get a free estimate on the repair.
Our KraftMaid Service Process – Step by Step
- 1
Diagnosis. We look at the whole cabinet, not just the symptom: doors, hinges, drawer boxes, slides, finish edges and the wall behind the unit. For a Winchester kitchen, we also check exhaust and moisture sources, since a repair that ignores the cause comes back.
- 2
Measure and quote. You get a written, line-item estimate with the parts and labor spelled out. We confirm whether it’s a repair, a reface or a full replacement before anything is ordered.
- 3
Repair or install. We fit matched parts, level and align doors and drawers, seal cut edges against dry air and moisture, and finish cabinet installation to the walls and floor lines so the run sits straight.
- 4
Test. Every door and drawer gets opened, closed and adjusted on site. Soft-close gets checked for flush closure, slides for smooth travel, and finish edges for a clean seal.
- 5
Warranty and handoff. We walk you through what was done, how to keep the finish clean and dry, and what’s covered by our workmanship warranty.
See the difference
Before
After
Before
After
Before
AfterKraftMaid Products We Service & Install in Winchester

We work on KraftMaid cabinetry in all its common forms: base cabinets, wall cabinets, tall pantry units, drawer stacks and vanities. That includes new KraftMaid cabinet installation and refacing of existing boxes, plus kitchen remodeling work where cabinets are the center of the job and bathroom vanity installation where a single unit needs to fit and finish cleanly. We handle hardware replacement, door and drawer replacement, and refinishing where the finish has failed.
We reference KraftMaid Vantage, Waypoint and Homestead as the lines common in the work we see, but we don’t claim to stock or specialize in any particular series. If it’s a KraftMaid cabinet in Winchester, we can assess it and tell you honestly what the repair involves.
We Also Service These Brands
KraftMaid is one line among many we work with. Our broader scope covers Kohler fixtures, GAF roofing systems, PGT windows and Master Halco fencing, so a whole-home project can stay with one contractor rather than a patchwork of specialists. That breadth is why homeowners in Winchester can plan a kitchen alongside a re-roof or a fence and coordinate it under one relationship.
FAQs – KraftMaid Construction Service in Winchester
No. We are not affiliated with, authorized by or a dealer for KraftMaid. We’re an independent construction company that installs, repairs and services KraftMaid cabinetry, and we’re upfront about that so you know exactly who’s doing the work.
Yes. We source OEM KraftMaid parts for hinges, slides and other critical components when they’re available, and matched aftermarket parts when they aren’t. We don’t claim to stock genuine KraftMaid parts; we source what fits your cabinet.
Most cosmetic repairs, including a hinge or slide replacement, take a single visit. Door replacement and refacing usually run a few days once the doors arrive. Full cabinet installation and kitchen remodeling depend on scope, and your written estimate sets the schedule. Call (888) 345-2603 for an exact quote; estimates are free.
We cover base, wall and tall cabinets, drawer stacks and bathroom vanities, plus installation, refacing, hardware replacement and finish repair. If you’re unsure whether your unit is in scope, call and describe it; we’ll tell you straight.
Not if the work is done correctly with compatible parts and proper installation. We keep repairs warranty-safe and explain what we’re doing and why. Check the terms of your KraftMaid warranty for the specifics that apply to your cabinets.
Typical estimated ranges for common KraftMaid work are below. These are estimates, and the written estimate sets the final price.
| Service | Typical Estimated Range |
|---|---|
| Cabinet Installation | $4,000 – $13,000 |
| Bathroom Vanity Installation | $800 – $3,000 |
| Kitchen Remodel | $14,000 – $45,000 |
Call (888) 345-2603 for an exact quote; estimates are free.
Yes. If the boxes are square, sound and dry, replacing doors and drawer fronts is a common and cost-effective repair, especially when thermofoil has peeled. We check the boxes first to confirm they’ll hold new doors.
Sticking drawers usually trace to a separated box joint, a worn slide or a drawer that’s out of square from weight. We diagnose the actual cause before replacing parts, since a new slide on a failing box just fails again.
Peeling thermofoil or laminate doors need the affected doors replaced or the film re-bonded with proper edge sealing. Patching without sealing the edge lets moisture back in. We assess the door and recommend replacement or refinishing based on how much has lifted.
Bathroom vanity installation typically runs $800 – $3,000, depending on vanity size, plumbing changes and finish. The written estimate sets the final price. Call (888) 345-2603 for a free quote.
Yes. Mixing brands is common when one line fits a space better in a given run, and we plan the layout so door styles, heights and finishes read as one kitchen. We’ll flag any place where mixing would look off before you order.
Book Your KraftMaid Service in Winchester, NV
Whether your KraftMaid doors are peeling, your drawers won’t close, or you’re planning a full kitchen or vanity installation in Winchester, we’ll give you a straight answer and a written line-item estimate. Call (888) 345-2603. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Estimates are free, and the price is set per job by the written estimate.
Written by the team at Construction Winchester.












